Allied Telesis AT-S63 - Manual (Page 188)

Chapter 14: Event Log Commands
188
CREATE LOG OUTPUT
Syntax
create log output= output-id destination= output-type
server= ipaddress
[facility=default|local1|local2|local3|local4|local5|local6
|local7] [syslogformat=extended|normal]
Parameters
output Specifies an ID number that identifies the output
definition. The possible output IDs are:
0 Permanent (nonvolatile) storage. You
cannot change or delete this ID.
1 Temporary (dynamic) storage. You
cannot change or delete this ID.
2 - 20 Available to be used for other outputs.
destination Specifies the destination for the log messages. The
only option currently supported is:
syslog Forwards log messages in syslog format
to a syslog server.
server Specifies the IP address of the syslog server.
facility Specifies the syslog facility levels for the generated
events. The default facilities are described in Table 3.
Table 3. Default Syslog Facilities
Facility
Number
Syslog Protocol
Definition
Mapped Event Log Modules and
Events
4 Security/
authorization
messages Security and authorization
messages from the following
modules: DOS, ENCO, PACCESS
(802.1x), PKI, PSEC (port security),
RADIUS, SSH, SSL, TACACS+,
and system events such as user
login and logout.
9 Clock daemon Time-based activities and events
from the following modules: TIME,
SNTP, and RTC.