Disable portaccess|portauth, Syntax, Parameters – Allied Telesis AT-S63 User Manual
Page 462: Description, Example
Advertising
Chapter 30: 802.1x Port-based Network Access Control Commands
462
DISABLE PORTACCESS|PORTAUTH
Syntax
disable portaccess|portauth
Note
The PORTACCESS and PORTAUTH keywords are equivalent.
Parameters
None.
Description
This command disables 802.1x Port-based Network Access Control on
the switch. This is the default setting.
Example
The following command disables 802.1x Port-based Network Access
Control on the switch:
disable portaccess
Advertising