Allied Telesis AT-S63 - Manual (Page 529)

AT-S63 Management Software Command Line Interface User’s Guide
529
Example
The following is an example of the command sequence to configuring the
SSH software on the server:
1. The first step is to create the two encryption key pairs. Each key must
be created separately and the key lengths must be at least one
increment (256 bits) apart. The following two commands create the
host and server keys using the recommended key lengths:
create enco key=1 type=rsa length=1024 description="host
key"
create enco key=2 type=rsa length=768 description="server
key"
2. The following command disables Telnet:
disable telnet
3. The last command activates the SSH software and sets the host key
as encryption key pair 1 and the server key as key pair 2:
enable ssh server hostkey=1 serverkey=2