Allied Telesis AT-S63 - Manual (Page 83)

83
Chapter 5
Simple Network Time Protocol (SNTP)
Commands
This chapter contains the following commands:
ˆ “ADD SNTPSERVER PEER|IPADDRESS” on page 84
ˆ “DELETE SNTPSERVER PEER|IPADDRESS” on page 85
ˆ “DISABLE SNTP” on page 86
ˆ “ENABLE SNTP” on page 87
ˆ “PURGE SNTP” on page 88
ˆ “SET DATE” on page 89
ˆ “SET SNTP” on page 90
ˆ “SET TIME” on page 91
ˆ “SHOW SNTP” on page 92
ˆ “SHOW TIME” on page 93
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information on SNTP, refer to Chapter 3, “Basic
Switch Parameters” in the AT-S63 Management Software Menus
Interface User’s Guide.