Show qos policy, Syntax, Parameter – Allied Telesis AT-S63 User Manual
Page 276: Description, Examples
Advertising
Chapter 18: Quality of Service (QoS) Commands
276
Section I: Basic Features
SHOW QOS POLICY
Syntax
show qos policy[=
idnumber
]
Parameter
policy
Specifies the ID of the policy you want to view. You can
specify more than one policy at a time. Separate multiple
policies with commas (e.g., 4,5,10).
Description
This command displays the policies on a switch.
Examples
This command displays all of the policies:
show qos policy
This command displays policy 54:
show qos policy=54
Advertising