Show garp database, Syntax, Parameters – Allied Telesis AT-S63 User Manual
Page 439: Description, Example
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
439
SHOW GARP DATABASE
Syntax
show garp=gvrp database
Parameters
garp
Specifies the GARP application you want to display.
The only GARP application supported by AT-S63
management software is GVRP.
Note
The online help for this command contains an STP option. This
option is not supported.
Description
This command displays the following parameters for the internal database
for the GARP application. Each attribute is represented by a GID index
within the GARP application.
GARP Application
GID Index
Attribute
Used
Example
The following command displays the database for all GARP applications:
show garp=gvrp database
Advertising