Set switch managementvlan, Syntax, Parameter – Allied Telesis AT-S63 User Manual
Page 423: Description, Example
AT-S63 Management Software Command Line Interface User’s Guide
423
SET SWITCH MANAGEMENTVLAN
Syntax
set switch managementvlan=
name
|
VID
Parameter
managementvlan
Specifies the management VLAN. You can specify
the VLAN by name or by its VID. You can specify
only one management VLAN. The default
management VLAN is Default_VLAN (VID 1).
Description
This command sets the management VLAN. The switch uses this VLAN to
watch for management packets from Telnet and web browser
management sessions. For background information on the function of the
management VLAN, refer to Chapter 19, “Port-based and Tagged VLANs”
in the <Italic>AT-S63 Management Software Menus Interface User’s
Guide. To determine the current management VLAN, use the SHOW
SWITCH command.
Example
The following command sets the TechSupport VLAN as the management
VLAN:
set switch managementvlan=TechSupport