Destroy switch trunk, Syntax, Parameter – Allied Telesis AT-S63 User Manual
Page 132: Description, Example
Chapter 9: Static Port Trunking Commands
132
DESTROY SWITCH TRUNK
Syntax
destroy switch trunk=
name
[tgid=
id_number
]
Parameter
trunk
Specifies the name of the trunk to be deleted.
tgid
Specifies the ID number of the static port trunk to be
deleted. This parameter is optional.
Description
This command deletes a static port trunk from a switch. After a port trunk
has been deleted, the ports that made up the trunk can be connected to
different end nodes.
Caution
Disconnect the cables from the port trunk on the switch before
destroying the trunk. Deleting a port trunk without first disconnecting
the cables can create loops in your network topology. Data loops
can result in broadcast storms and poor network performance.
Example
The following command deletes the trunk called load22 from the switch:
destroy switch trunk=load22