Allied Telesis AT-S63 - Manual (Page 400)

Chapter 25: MSTP Commands
400
same on all bridges in a region. Different regions can
have the same version level without conflict.
Description
This command configures the following MSTP parameter settings.
ˆ Hello time
ˆ Forwarding delay
ˆ Maximum age time
ˆ Maximum hop count
ˆ Force version of STP or normal MSTP
ˆ Configuration name
ˆ Revision level
Examples
The following command disables MSTP and returns all MSTP parameter
settings to their default values:
set mstp default
The following command sets the hop count to 10, the configuration name
to Engineering Region, and the reversion level to 2:
set mstp maxhops=10 configname="Engineering Region"
revisionlevel=2
The following command uses the FORCEVERSION parameter to
configure the bridge to use the MSTP parameters but to transmit only STP
BPDU packets:
set mstp forceversion=forcestpcompatible