Allied Telesis AT-S63 - Manual (Page 389)

389
Chapter 25
MSTP Commands
This chapter contains the following commands:
ˆ “ACTIVATE MSTP” on page 390
ˆ “ADD MSTP” on page 391
ˆ “CREATE MSTP” on page 392
ˆ “DELETE MSTP” on page 393
ˆ “DESTROY MSTP MSTIID” on page 394
ˆ “DISABLE MSTP” on page 395
ˆ “ENABLE MSTP” on page 396
ˆ “PURGE MSTP” on page 397
ˆ “SET MSTP” on page 398
ˆ “SET MSTP CIST” on page 401
ˆ “SET MSTP MSTI” on page 402
ˆ “SET MSTP MSTIVLANASSOC” on page 404
ˆ “SET MSTP PORT” on page 405
ˆ “SHOW MSTP” on page 408
Note
Remember to save your changes with the SAVE CONFIGURATION
command.
Note
For background information on the Multiple Spanning Tree Protocol
(MSTP)., refer to Chapter 22, “MSTP” in the AT-S63 Management
Software Menus Interface User’s Guide.