Allied Telesis AT-S63 - Manual (Page 247)

AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Features 247
CREATE QOS POLICY
Syntax
create qos policy= value [description=“ string ”]
[indscpoverwrite= value |none] [remarkindscp=all|none]
[trafficclasslist= values |none]
[redirectport= value |none]
[ingressport= port |all|none] [egressport= port |none]
Parameters
policy Specifies an ID number for the policy. Each policy on
the switch must be assigned a unique number. The
range is 0 to 255. The default is 0. This parameter is
required.
description Specifies a description for the policy. The description
can be from 1 to 15 alphanumeric characters. Spaces
are allowed. If the description contains spaces, it must
be enclosed in double quotes. Otherwise, the quotes
are optional. This parameter is optional, but
recommended. Names can help you identify the
policies on the switch.
indscpoverwrite Specifies a replacement value to write into the DSCP
(TOS) field of the packets. The range is 0 to 63. If None
is specified, the DSCP value in the packets is not
changed. The default is None.
A new DSCP value can be set at all three levels: flow
group, traffic class, and policy. A DSCP value specified
in a flow group overrides a DSCP value specified at the
traffic class or policy level. A DSCP value specified at
the policy level is used only if no value has been
specified at the flow group and traffic class levels.
remarkindscp Specifies the conditions under which the ingress DSCP
value is overwritten. If All is specified, all packets are
remarked. If None is specified, the function is disabled.
The default is None.
trafficclasslist Specifies the traffic classes to be assigned to the policy.
The specified traffic classes must already exist.
Separate multiple IDs with commas (e.g., 4,11,13).
redirectport Specifies the port to which the classified traffic from the
ingress ports is redirected. The options are: