Allied Telesis AT-S63 - Manual (Page 85)

AT-S63 Management Software Command Line Interface User’s Guide
85
DELETE SNTPSERVER PEER|IPADDRESS
Syntax
delete sntpserver peer|ipaddress= ipaddress
Parameter
peer Specifies the IP address of an SNTP server. The
ipaddress parameters are equivalent.
Description
This command deletes the IP address of the SNTP server from the SNTP
client software on the switch and returns the parameter to the default value
of 0.0.0.0. To view the IP address, refer to “SHOW SNTP” on page 92.
Example
The following command deletes the SNTP server with the IP address
148.35.16.248:
delete sntpserver ipaddress=148.35.16.248