Delete radiusserver, Syntax, Parameter – Allied Telesis AT-S63 User Manual
Page 537: Description, Example
Advertising
AT-S63 Management Software Command Line Interface User’s Guide
537
DELETE RADIUSSERVER
Syntax
delete radiusserver server|ipaddress=
ipaddress
Parameter
server
Specifies the IP address of a RADIUS server to be deleted
ipaddress
from the management software. The parameters are
equivalent.
Description
This command deletes the IP address of a RADIUS from your switch.
Example
The following command deletes the RADIUS server with the IP address
149.245.22.22:
delete radiusserver ipaddress=149.245.22.22
Advertising