Resetting a port – Allied Telesis AT-S63 User Manual
Page 116
Chapter 6: Port Parameters
116
Section I: Basic Operations
Resetting a Port
Resetting a port is useful in situations where a port is having problems
establishing a valid connection to its end node.
To reset a port, perform the following procedure:
1. From the Main Menu, type 1 to select Port Configuration.
The Port Configuration menu is shown in Figure 25 on page 102.
2. From the Port Configuration menu, type 1 to select Port Configuration.
The following prompt is displayed:
Enter port-list ->
3. Enter the number of the port you want to reset. To reset a range of
ports, enter the first and last ports of the range, separated by a dash
(for example, 4-8). You cannot specify nonconsecutive ports (for
example, 5,7,9)
The Port Configuration menu is shown in Figure 26 on page 103.
4. From the Port Configuration menu, type X to select Reset Port.