Allied Telesis AT-S63 User Manual
Page 262
Chapter 13: Classifiers
262
Section II: Advanced Operations
Refer to “Classifier Overview” on page 252 for definitions of the
variables.
7. Repeat steps 5 and 6 to adjust any other variables necessary to define
the traffic flow for this classifier.
8. After configuring the necessary variables, type C to select Create
Classifier.
The switch creates the classifier. If any of the settings are
incompatible, the system displays an error message. Refer to the
variable definitions in “Classifier Criteria” on page 253 for assistance in
resolving compatibility issues.
9. To create more classifiers, repeat this procedure starting with step 3.
10. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
11. To add classifiers to an ACL, refer to “Creating an ACL” on page 277.
To add classifiers to a QoS policy, refer to “Managing Flow Groups” on
page 313.