Allied Telesis AT-S63 - Manual (Page 318)

Chapter 16: Quality of Service
318 Section II: Advanced Operations
6. Type D to delete the flow group.
The flow group is deleted from the switch. The group is removed from
any traffic classes to which it is assigned.
7. To delete another flow group, repeat this procedure starting with step
4.
8. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Displaying Flow
Groups
To display flow groups, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 82 on page 259.
2. From the Security and Services menu, type 6 to select Quality of
Service.
The Quality of Service (QoS) menu is shown in Figure 108 on page
313.
3. From the Quality of Service (QoS) menu, type 1 to select Flow Group
Configuration.
The Flow Group Configuration menu is shown in Figure 109 on page
314.
4. From the Flow Group Configuration menu, type 4 to select Show Flow
Groups.
The Show Flow Groups menu is shown in Figure 113.
Figure 113. Show Flow Groups Menu
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Show Flow Groups
Number of Flow Groups: 5
ID Description
------------------------------------------------
0
Dev database
1 Inv database
2 Video1
3 Video2
4 Demo dev
D - Display Flow Group Details
U - Update Display
R - Return to Previous Menu
Enter your selection?