Allied Telesis AT-S63 - Manual (Page 669)

AT-S63 Management Software Menus Interface User’s Guide
Section IV: Port Security 669
Configuring RADIUS Accounting
The AT-S63 management software supports RADIUS accounting for ports
operating in the Authenticator role. The accounting information sent by the
switch to a RADIUS server includes the date and time when clients log on
and log off, as well as the number of packets sent and received by a switch
port during a client session. For background information on this feature,
refer to “RADIUS Accounting” on page 652. This feature is disabled by
default on the switch.
To configure this feature, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 82 on page 259.
2. From the Security Configuration menu, type 1 to select Port Access
Control (802.1X).
3. From the Security Configuration menu, type 1 to select Port Access
Control (802.1X).
The Port Access Control (802.1X) menu is shown in Figure 236 on
page 657.
4. From the Port Access Control (802.1X) menu, type 7 to select
Configure Accounting.
The RADIUS Accounting menu is shown in Figure 243.
Figure 243. Radius Accounting Menu
5. Adjust the following parameters as necessary.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
RADIUS Accounting
1 - Status............ Disabled
2 - Port.............. 1813
3 - Type.............. Network
4 - Trigger Type...... Start_Stop
5 - Update Status..... Disabled
6 - Update Interval... 60
R - Return to Previous Menu
Enter your selection?