Allied Telesis AT-S63 - Manual (Page 389)

AT-S63 Management Software Menus Interface User’s Guide
Section III: SNMPv3 389
5. Enter the User Name.
The following prompt is displayed:
Enter Storage Type [V-Volatile, N-NonVolatile]:
6. Select one of the following storage types for this table entry:
V - Volatile
Select this storage type if you do not want the ability to save an entry in
the SNMPv3 User Table to nonvolatile memory. After making changes
to an SNMPv3 User Table entry with a Volatile storage type, the S -
Save Configuration Changes option does not appear on the Main
Menu.
N-NonVolatile
Select this storage type if you want the ability to save an entry in the
SNMPv3 User Table to nonvolatile memory. After making changes to
an SNMPv3 User Table entry with a NonVolatile storage type, the S -
Save Configuration Changes option appears on the Main Menu,
allowing you to save your changes. Allied Telesyn recommends this
storage type.
7. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.