Allied Telesis AT-S63 - Manual (Page 789)

AT-S63 Management Software Web Browser Interface User’s Guide
789
Note
Login names and passwords are case sensitive.
RJ-45 Serial
Terminal Port
Default Settings
The following table lists the RJ-45 serial terminal port default settings.
SNTP Default
Settings
The following table lists the SNTP default settings.
RJ-45 Serial Terminal Port Setting Default
Data Bits 8
Stop Bits 1
Parity None
Flow Control None
Baud Rate 9600 bps
SNTP Setting Default
System Time 00:00:00 on January 1,
1970
SNTP Status Disabled
SNTP Server 0.0.0.0
UTC Offset +0
Daylight Savings Time (DST) Enabled
Poll Interval 600 seconds