Allied Telesis AT-S63 - Manual (Page 239)

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 239
If you type Y, the following prompt is displayed:
Enter file name (*.log) ->
6. Type a name for the file with a .log file name extension.
The following message is displayed:
Saving log to file.
When the save process is complete, the word “Complete” is displayed,
followed by another prompt:
Press any key to continue.
7. Press any key.
The log file is saved in the switch’s file system as an ASCII file.
8. To review the log file, type R to return to the System Administration
menu.
9. From the System Administration menu, type 9 to select System
Utilities.
The System Utilities menu is displayed, as shown in Figure 7 on page
53.
10. From the System Utilities menu, type 1 to select File Operations.
The File Operations menu is displayed, as shown in Figure 56 on page
184.
11. From the File Operations menu, type 7 to select View File.
The following prompt is displayed:
Enter file name to view:
12. Type the file name with the .log file name extension and press
Return.