Displaying a list of multicast routers – Allied Telesis AT-S63 User Manual

Page 360

Advertising
background image

Chapter 18: IGMP Snooping

360

Section II: Advanced Operations

Displaying a List of Multicast Routers

A multicast router is a router that is receiving multicast packets from a
multicast application and transmitting the packets to host nodes. You can
use the AT-S63 management software to display a list of the multicast
routers that are connected to the switch.

To display a list of the multicast routers, perform the following procedure:

1. From the Main Menu, type 6 to select Advanced Configuration.

The Advanced Configuration menu is shown in Figure 131 on page
354

2. From the Advanced Configuration menu, type 1 to select IGMP

Snooping Configuration.

The IGMP Snooping Configuration menu is shown in Figure 132 on
page 354.

3. From the IGMP Snooping Configuration menu, type 7 to select View

Multicast Routers List.

The View Multicast Routers List menu is shown in Figure 134.

Figure 134. View Multicast Routers List Menu

The View Multicast Routers List menu displays a table that contains
the following columns of information:

VLAN
The VID of the VLAN in which the port is an untagged member.

Port/Trunk ID
The port on the switch where the multicast router is connected. If the

Allied Telesyn Ethernet Switch AT-94xx - AT-S63

Marketing

User: Manager

11:20:02 02-Mar-2005

View Multicast Routers List

VLAN

Port/Trunk ID RouterIP

----------------------------------------------------
1

14

172.16.01.1

U - Update Display
R - Return to Previous Menu

Enter your selection?

Advertising