Enabling or disabling rrp snooping – Allied Telesis AT-S63 User Manual
Page 366
Chapter 19: RRP Snooping
366
Section II: Advanced Operations
Enabling or Disabling RRP Snooping
To enable or disable RRP snooping on a switch, perform the following
procedure:
1. From the Main Menu, type 6 to select Advanced Configuration.
The Advanced Configuration menu is shown in Figure 131 on page
354.
2. From the Advanced Configuration menu, type 2 to select RRP
Snooping Configuration.
The RRP Snooping Configuration menu is shown in Figure 135.
Figure 135. RRP Snooping Menu
3. From the RRP Snooping Configuration menu, type 1 to toggle the
setting between Enabled and Disabled. The default setting is disabled.
A change to the status of RRP snooping is immediately activated on
the switch.
4. After making changes, type R until you return to the Main Menu. Then
type S to select Save Configuration Changes.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager
11:20:02 02-Mar-2005
RRP Snooping Configuration
1 - RRP Snooping Status ............ Disabled
R - Return to Previous Menu
Enter your selection?