Managing flow groups, Creating a flow group – Allied Telesis AT-S63 User Manual
Page 313
AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations
313
Managing Flow Groups
This section contains the following procedures:
“Modifying a Flow Group” on page 315
“Deleting a Flow Group” on page 317
“Displaying Flow Groups” on page 318
Creating a Flow
Group
To create a flow group, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 82 on page 259.
2. From the Security and Services menu, type 6 to select Quality of
Service.
The Quality of Service (QoS) menu is shown in Figure 108.
Figure 108. Quality of Service (QoS) menu
3. From the Quality of Service (QoS) menu, type 1 to select Flow Group
Configuration.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager
11:20:02 02-Mar-2005
Quality of Service (QoS)
1 - Flow Group Configuration
2 - Traffic Class Configuration
3 - Policy Configuration
R - Return to Previous Menu
Enter your selection?