Allied Telesis AT-S63 - Manual (Page 733)

AT-S63 Management Software Menus Interface User’s Guide
Section VII: Management Security 733
Adding a Certificate to the Database
After you have created a certificate or received a certificate from a public
or private CA, you need to add it into the certificate database to make it
available for use by the switch’s web server. After you add a certificate to
the certificate database, it appears in the X509 Certificate Management
menu.
To add a certificate to the certificate database, perform the following
procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 82 on page 259.
2. From the Security and Services menu, type 7 to select Keys/
Certificates Configuration.
The Keys/Certificates Configuration menu is shown in Figure 251 on
page 705.
3. From the Keys/Certificate menu, type 3 to select Public Key
Infrastructure (PKI) Configuration.
The Public Key Infrastructure (PKI) Configuration menu is shown in
Figure 257 on page 730.
4. From the Public Key Infrastructure (PKI) Configuration menu, type 2 to
select X509 Certificate Management.
The X509 Certificate Management menu is shown in Figure 258 on
page 730.
5. From the X509 Certificate Management menu, type 2 to select Add
Certificate.