Allied Telesis AT-S63 - Manual (Page 153)

AT-S63 Management Software Menus Interface User’s Guide
Section I: Basic Features 153
aggregator appears in the menu only if there is at least one active
aggregate trunk between the switch and another network device.
Figure 46. LACP (IEEE 802.3ad) Aggregator Status Menu
If there are no active aggregate trunks on the switch, the following
message is displayed:
No Aggregator with aggregatable Ports
Allied Telesyn Ethernet Switch AT-9400 Series - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
LACP (IEEE 802.3ad) Aggregator Status
Aggregator #1 ................. Sales server
Adminkey ...................... 0x0050
Oper Key....................... 0x1405
Speed ......................... 100 Mbps
Ports in LAGID ................ 1-4
Aggregated Port ............... 1-4
Mode .......................... SRC/DST MAC
LAG ID:
[(0080,00-30-84-00-00-00,0041,00,0000),(0080,00-30-84-00-00-02,0004,00,0000)]
R - Return to Previous Menu
Enter your selection?