Chapter 3, Basic switch parameters – Allied Telesis AT-S63 User Manual
Page 43
Section I: Basic Operations
43
Chapter 3
Basic Switch Parameters
This chapter contains a variety of information and procedures for basic
switch setup. Sections in the chapter include:
“When Does a Switch Need an IP Address?” on page 44
“Configuring the IP Address, Switch Name, and Other Basic
Parameters” on page 46
“Activating the BOOTP or DHCP Client Software” on page 49
“Displaying the AT-9400 Series Switch Hardware and Software
Information” on page 51
“Rebooting a Switch” on page 53
“Working With the Manager and Operator Passwords” on page 55
“Setting the System Time” on page 58
“Configuring the Console Startup Mode” on page 62
“Configuring the Console Timer” on page 63
“Enabling or Disabling the Telnet Server” on page 64
“Setting the Baud Rate of the Serial Terminal Port” on page 65
“Pinging a Remote System” on page 66
“Returning the AT-S63 Management Software to the Factory Default
Values” on page 67
“Displaying System Hardware Information” on page 69