Enabling or disabling igmp snooping – Allied Telesis AT-S63 User Manual
Page 357
Advertising
AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations
357
Enabling or Disabling IGMP Snooping
To configure IGMP snooping on the switch, perform the following
procedure:
1. From the Main Menu, type 6 to select Advanced Configuration.
The Advanced Configuration menu is shown in Figure 131 on page
354.
2. From the Advanced Configuration menu, type 1 to select IGMP
Snooping Configuration.
The IGMP Snooping Configuration menu is shown in Figure 132 on
page 354.
3. From the IGMP Snooping Configuration menu, type 1 to select IFGMP
Snooping Status.
The following message is displayed:
IGMP Snooping (E-Enabled, D-Disabled):
4. Type E to enable IGMP Snooping or D to disable IGMP Snooping. The
default is disabled.
Advertising