Displaying the aces – Allied Telesis AT-S63 User Manual

Page 785

Advertising
background image

AT-S63 Management Software Menus Interface User’s Guide

Section VII: Management Security

785

Displaying the ACEs

To display the ACEs, perform the following procedure:

1. From the Main Menu, type 5 to select System Administration.

The System Administration menu is shown in Figure 4 on page 46.

2. From the System Administration menu, type 7 to select Management

ACL menu.

The Management ACL menu is shown in Figure 275 on page 780.

3. From the Management ACL menu, type 4 to select Display All

Management ACL Entries.

A list of the ACEs along with the specifics of each ACE is displayed at
the bottom of the Management ACL menu, as shown in Figure 276.

Figure 276. Management ACL Menu with ACEs Display

The Management ACL menu provides the following information about
the ACEs:

IP Address
The IP address of a management station.

Mask
The parts of the IP address the switch is filtering on.

Protocol
The protocol used for management packets.

Allied Telesyn Ethernet Switch AT-94xx - AT-S63

Marketing

User: Manager

11:20:02 02-Mar-2005

Management ACL Menu

Configuring Management ACL

1 - Management ACL Status ........... Disabled
2 - Add Management ACL Entry
3 - Delete Management ACL Entry
4 - Display All Management ACL Entries

R - Return to Previous Menu

Enter your selection? 4
IP Address

Mask

Protocol

Interface

133.22.145.18

255.255.255.255

TCP & UDP

All

Press any key to continue

Advertising