Allied Telesis AT-S63 - Manual (Page 226)

Chapter 11: File Downloads and Uploads
226 Section II: Advanced Operations
3. From the System Administration menu, type 9 to select System
Utilities.
The System Utilities menu is shown in Figure 7 on page 53.
4. From the System Utilities menu, type 2 to select Downloads and
Uploads.
The Downloads and Uploads menu is shown in Figure 63 on page
207.
5. From the Downloads and Uploads menu, type 4 to select Upload a
File.
The following prompt is displayed:
Only TFTP uploads are available for a Telnet access
TFTP Server IP address:
6. Enter the IP address of the TFTP server.
The following prompt is displayed:
Remote File Name:
7. Enter the directory path where you want the system file stored on the
TFTP server along with a name for the file.
The following message is displayed:
Local File Name:
8. Enter the name of the system file on the switch that you want to upload
to the TFTP server. You can specify only one file. You cannot use
wildcards in the file name.
The following message is displayed:
Sending the file to Remote TFTP Server - Please wait ...
After the switch has uploaded the system file, the following message is
displayed:
File sent successfully!
The file is now stored on the TFTP server. You can now download the
file onto another AT-9400 Series switch in your network.