Displaying gvrp counters – Allied Telesis AT-S63 User Manual
Page 597
AT-S63 Management Software Menus Interface User’s Guide
Section V: VLANs
597
Displaying GVRP Counters
To display GVRP counters, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Configuration.
The VLAN Configuration menu is shown in Figure 198 on page 561.
2. From the VLAN Configuration menu, type 7 to select Configure GARP-
GVRP.
The GARP-GVRP menu is shown in Figure 210 on page 592.
3. From the GARP-GVRP menu, type O to select Other GVRP
Parameters.
The Other GVRP Parameters menu is shown in Figure 214.
Figure 214. Other GVRP Parameters Menu
4. From the Other GARP Port Parameters menu, type 1 to select Display
GVRP Counters.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager
11:20:02 02-Mar-2005
Other GVRP Parameters
1 - Display GVRP Counters
2 - Display GVRP Database
3 - Display GIP Connected Ports Ring
4 - Display GVRP State Machine
R - Return to Previous Menu
Enter your selection?