Allied Telesis AT-S63 - Manual (Page 714)

Chapter 31: Encryption Keys
714 Section VII: Management Security
Importing an Encryption Key
Use the following procedure to import a public key from the AT-S62 file
system into the key management database. If a file contains both public
and private keys, only the public key is imported. The private key is
ignored.
Note
It is unlikely that you will ever need to perform this procedure for an
SSL public key. A switch can only use those SSL public keys that it
has generated itself.
This procedure starts from the Key Management menu. If you are unsure
how to display the menu, perform steps 1 to 3 in “Creating an Encryption
Key” on page 705.
To import a public key, perform the following procedure:
1. From the Main Menu, type 7 to select Security and Services.
The Security and Services menu is shown in Figure 82 on page 259.
2. From the Security and Services menu, type 7 to select Keys/Certificate
Configuration.
The Keys/Certificate Configuration menu is shown in Figure 251 on
page 705.
3. From the Keys/Certificates Configuration menu, type 2 to select Key
Management.
The Key Management menu is shown in Figure 252 on page 706.
4. From the Key Management menu, type 5 to select Import Key From
File to import an RSA - Public key.