Deleting all dynamic mac addresses – Allied Telesis AT-S63 User Manual
Page 681
AT-S63 Management Software Menus Interface User’s Guide
Section IV: Port Security
681
Deleting All Dynamic MAC Addresses
To delete all dynamic unicast and multicast MAC address from the MAC
address table, perform the following procedure:
1. From the Main Menu, type 4 to select MAC Address Tables.
The MAC Address Tables menu is shown in Figure 244 on page 674.
2. From the MAC Address Tables menu, type 2 to select MAC Addresses
Configuration.
The MAC Addresses Configuration menu is shown in Figure 248 on
page 678.
3. From the MAC Addresses Configuration menu, type 3 to select Delete
All Dynamic MAC Addresses.
The following prompt is displayed:
All learned MAC (non-static) addresses will be deleted
Do you want to continue? [Yes/No] ->
4. Type Y to delete the addresses or N to cancel the procedure.
If you respond with yes, all dynamic unicast and multicast addresses
are deleted from the table, and the switch begins to learn new
addresses.