Allied Telesis AT-S63 - Manual (Page 199)

AT-S63 Management Software Menus Interface User’s Guide
Section II: Advanced Operations 199
Working with Flash Memory
An AT-9400 Series switch contains flash memory where the file system,
which contains files such as the configuration file, and event log are
stored.
Displaying
Information
about the Flash
Memory
To display information about the flash memory, perform the following
procedure:
1. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown Figure 4 on page 46.
2. From the System Administration menu, type 9 to select System
Utilities.
The System Utilities menu is shown in Figure 7 on page 53.
3. From the System Utilities menu, type 1 to select File Operations.
The FIle Operations menu is shown in Figure 56 on page 184.
4. From the File Operations menu, type F to select Display Flash
Information.
The Display Flash Information menu is shown in Figure 60.
Figure 60. Display Flash Information Menu
Formatting the
Flash Memory
When the file system in flash memory is full, you can make more room by
formatting the flash memory. For information about displaying how much
room is left in the flash memory, refer to “Displaying Information about the
Flash Memory” on page 199.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Display Flash Information
Flash:
------------------------------------------------------
Files 4096 bytes (2 files)
Free 8219648 bytes
Total 8223744 bytes
U - Update Display
R - Return to Previous Menu
Enter your selection?