Displaying the mac address tables – Allied Telesis AT-S63 User Manual
Page 674
Chapter 29: MAC Address Table
674
Section IV: Port Security
Displaying the MAC Address Tables
The AT-S63 management software has two menu selections for
displaying the MAC addresses of a switch. One selection displays the
static and dynamic unicast MAC addresses while the other displays the
static and dynamic multicast addresses.
To display the MAC address tables, perform the following procedure:
1. From the Main Menu, type 4 to select MAC Address Tables.
The MAC Address Tables menu is shown in Figure 244.
Figure 244. MAC Address Tables Menu
2. From the MAC Address Tables menu, type 3 to select Display Unicast
MAC Addresses or 4 to select Display Multicast MAC Addresses.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager
11:20:02 02-Mar-2005
MAC Address Tables
1 - MAC Address Aging Time ......... 300 second(s)
2 - MAC Addresses Configuration
3 - Display Unicast MAC Addresses
4 - Display Multicast MAC Addresses
R - Return to Previous Menu
Enter your selection?