Allied Telesis AT-S63 - Manual (Page 210)

Chapter 11: File Downloads and Uploads
210 Section II: Advanced Operations
the software download. The download process takes several minutes
to complete.
Figure 66. XModem File Send Window
Note
After the switch has downloaded the new image, it begins to
initialize the software, a process that takes approximately one
minute to complete. The switch does not forward any network traffic
during the initialization process. After the management software is
initialized, the switch automatically resets.
Downloading the
AT-S63 Image
from a Telnet
Management
Session
To download a new software image onto a switch from a Telnet
management session using TFTP, perform the following procedure:
1. Establish a Telnet management session on the switch where you
intend to download the new management software.
2. From the Main Menu, type 5 to select System Administration.
The System Administration menu is shown in Figure 4 on page 46.
3. From the System Administration menu, type 9 to select System
Utilities.
The System Utilities menu is shown in Figure 7 on page 53.
4. From the System Utilities menu, type 2 to select Downloads and
Uploads.