Allied Telesis AT-S63 - Manual (Page 316)

Chapter 16: Quality of Service
316 Section II: Advanced Operations
The Flow Group Configuration menu is shown in Figure 109 on page
314.
4. From the Flow Group Configuration menu, type 2 to select Modify Flow
Group.
The following prompt is displayed:
Available Flow Group(s): 0-10
Enter Flow Group ID : [0 to 1023] -> 0
5. Enter the ID number of the flow group you want to modify. You can
modify only one flow group at a time.
The Modify Flow Group menu is shown in Figure 111.
Figure 111. Modify Flow Group Menu
6. Modify the settings as needed.
When you modify a flow group, note the following:
ˆ You cannot change the flow group ID number.
ˆ To delete a value from a variable so as to leave it blank, select the
variable and then use the backspace key to delete its default
value.
ˆ Specifying an invalid value for a parameter that already has a
value causes the parameter to revert to its default value.
7. Type M to select Modify Flow Group.
8. To modify another flow group, repeat this procedure starting with step
4. To assign the flow group to a traffic class, go to “Managing Traffic
Classes” on page 320.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Modify Flow Group
1 - Flow Group ID .............. 2
2 - Description ................ Video1
3 - DSCP value ................. 0
4 - Priority ................... 6
5 - Remark Priority ............ No
6 - Classifier List ............ 11
M - Modify Flow Group
R - Return to Previous Menu
Enter your selection?