Allied Telesis AT-S63 - Manual (Page 688)

Chapter 30: Web Server
688 Section VII: Management Security
The Web Server Configuration menu is shown in Figure 249.
Figure 249. Web Server Configuration Menu
3. Type 1 to select Status to enable or disable the web server. To
configure the web server, you must first disable it.
Toggle between the following values:
Enabled - Enables the web server. This is the default setting.
Disabled - Disables the web server. (If you are making any changes to
the web server settings, you must first disable it.)
4. Type 2 to select Mode to set the mode of the web server.
The following prompt is displayed:
Enter Web Server Mode (1 - HTTP, 2 - HTTPS):
[1 to 2] ->
1. Choose one of the following:
1 - HTTP to select the non-secure HTTP mode for the web server. This
is the default value.
2 - HTTPS to select the secure HTTPS mode. This setting activates
the SSL protocol on the web server.
When you choose HTTPS, the following prompt is displayed:
Enter SSL Key ID ->
2. Enter an SSL Key ID.
Enter the ID number of an encryption key on the switch. (To view the
encryption key IDs, refer to “Creating an Encryption Key” on
page 705.) You must have already created the encryption key and a
certificate using the key. You must also have already added the
certificate to the certificate database.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Web Server Configuration
1 - Status ............................ Disabled
2 - Mode .............................. HTTP
3 - Port Number ....................... 80
R - Return to Previous Menu
Enter your selection?