Allied Telesis AT-S63 - Manual (Page 573)

AT-S63 Management Software Menus Interface User’s Guide
Section V: VLANs 573
Deleting a VLAN
Note
To delete a VLAN, you need to know its VID. To view VLAN VIDs,
refer to “Displaying VLANs” on page 571.
To delete a VLAN, perform the following procedure:
1. From the Main Menu, type 2 to select VLAN Configuration.
The VLAN Configuration menu is shown in Figure 198 on page 561.
2. From the VLAN Configuration menu, type 4 to select Configure
VLANs.
The Configure VLANs menu is shown in Figure 199 on page 562.
Note
If option 4, Configure VLANs, is not displayed in the menu if the
switch is running a multiple VLAN mode. To change a switch’s VLAN
mode, refer to “Selecting a VLAN Mode” on page 616.
3. From the Configure VLANs menu, type 3 to select Delete VLAN.
The Delete VLAN menu is shown in Figure 204.
Figure 204. Delete VLAN Menu
4. From the Delete VLAN menu, type 1 to select VLAN ID (VID).
The following prompt is displayed:
Enter new value -> [2 to 4094] ->
5. Enter the VID of the VLAN you want to delete. You can specify only
one VID at a time.
Allied Telesyn Ethernet Switch AT-94xx - AT-S63
Marketing
User: Manager 11:20:02 02-Mar-2005
Delete VLAN
1 - VLAN ID (VID) ........
R - Return to Previous Menu
Enter your selection?