Barco DX-700 - Manual (Page 100)

100 DX-700 • User’s Guide • Rev 02
4. Operation
Using the Input Wizard
The Wall Gamma Adjustment Menu enables you to adjust the wall’s gamma
curve. Two gamma “presets” are provided as standard: {Indoor} and {Outdoor}.
If another curve was stored in the wall and detected by the system, that “stored”
curve will be shown as a button.
11. Press the button for the desired gamma curve, then press {Apply} to update the
wall with the new gamma settings.
12. Press {Next} to display the Save Configuration Menu, shown in the following
illustration.
Figure 4-34. Input Wizard: Save Configuration Menu
The Save Configuration Menu enables you to save a preset configuration.
S
Example : The bank has three ungrouped outputs and three input modules.
You have already assigned a DVI input (from input module 1) to output 1, and
you have just used the Input Wizard to assign an RGBHV input (from input
Note Additional gamma curves can be selected. Refer to the
“
Managing LED ” section on page 126 for details.
Important The selected gamma curve will be applied to all tiles in the
LED wall, even if the tiles have different gamma curves.
Note A DX-700 “preset” is a file that stores bank-specific input
configurations and wall settings in non-volatile memory. Each
preset is a snapshot of all outputs in the selected bank.