Input management menu operations, Global input management functions, Fåéìí=j~е~цйгйен=jéåì=lééê~нбзел – Barco DX-700 User Manual
Page 109
DX-700 • User’s Guide • Rev 02
109
4. Operation
Using the Input Management Menu
fåéìí=j~е~ЦЙгЙен=jÉåì=léÉê~нбзел
The Input Management Menu enables you to adjust any active input on a selected input
module, and create presets.
The following topics are discussed:
•
Global Input Management Functions
•
•
•
•
Adjusting Image Processing Parameters
•
•
•
•
•
Saving Input Management Settings
däçÄ~ä=fåéìí=j~е~ЦЙгЙен=cìåÅíáçåë
The following global functions are available on the Input Management Menu:
•
Press {Save} to perform a “system save,” which saves the state of all banks,
inputs and outputs in a single register. This register is recalled when you power
up the DX-700, enabling you to boot the system in the same configuration as
when you last saved the settings.
•
Press {Save As} to display the Keyboard, which enables you to name and save a
preset.
•
Press {Raster} to display the source’s raster box.
•
Press {Restore} to restore default values. This function is context specific:
~
For Window Settings, the input is restored to default scaling.
~
For Viewport Settings, the input is restored to its default size.
~
For Image Processing, Input Balance, Effects and Timing, the menu
is restored to its default (system) values.
Note
Within the Input Management Menu, adjustments are made
to the active input on a selected input module. If you want to
adjust an input that is not currently active, you must first
“activate” it by recalling a preset.