Operation – Barco DX-700 User Manual
Page 117
DX-700 • User’s Guide • Rev 02
117
4. Operation
Using the Input Management Menu
8.
Press {Cable Equalization} to display the DVI Cable Equalization Menu.
Figure 4-51.
Input Management Menu: DVI Cable Equalization Menu (sample)
9.
Use the Equalization slider to adjust DVI cable equalization as required.
This completes all adjustments on Image Processing Tab 1.
Use the following steps to adjust clip to sub-black and luma tracking:
1.
On the Input Management Menu, select Image Processing Tab 2 (I.P. 2) to
display the second set of image processing adjustments.
Figure 4-52.
Input Management Menu: Image Processing Tab 2 (sample)
2.
Use the Clip to Sub-Black slider to adjust the sub-black clip. Clip to Sub-Black
eliminates low-level noise in the black regions of the image.