Barco DX-700 - Manual (Page 71)

DX-700 • User’s Guide • Rev 02 71
4. Operation
Quick Setup and Operations
11. Run the Input Wizard. Refer to the “ Using the Input Wizard ” section on page 93
for complete instructions.
12. Fine tune your inputs as required. Refer to the “ Using the Input Management
Menu ” section on page 107 for instructions.
13. Fine tune your displays as required. Refer to the “ Using the Display
Management Menu ” section on page 124 for instructions.
14. Recall the desired preset, and you’re ready to go. Refer to the “ Using the Preset
Management Menu ” section on page 103 for instructions.
This completes the “quick setup” procedure.
Important Ensure that you save a system “preset” after you configure
each input.