Barco DX-700 - Manual (Page 126)

126 DX-700 • User’s Guide • Rev 02
4. Operation
Using the Display Management Menu
aáëéä~ó=j~е~ЦЙгЙен=léÉê~нбзел
The Display Management Menu enables you to adjust output display (LED) parameters
and Fiberlink parameters. The following topics are discussed:
• Managing LED
• Managing Fiberlink Settings
• Forcing the Display
j~е~ЦбеЦ=iba
For a selected output (or group of outputs), Display Management functions enable you to
set the control unit, tile resolution, contrast, gamma, on screen display (OSD), the tile’s
internal test pattern and Fiberlink parameters.
„
Use the following steps to manage LED settings:
1. From the Home Menu, press {Display Management} to display the Output
Selection Menu
.
Figure 4-60. Output Selection Menu (sample)
2. Immediately above the graphic, press the button for the bank that contains the
output whose LED display you wish to manage.
3. On the selected bank, press the output that you wish to manage. The Display
Management Menu
appears.