Barco DX-700 - Manual (Page 79)

DX-700 • User’s Guide • Rev 02 79
4. Operation
Output Table Description
lìíéìí=q~ÄäÉ=aÉëÅêáéíáçå
For your reference, an “output table”' is provided at the top of various DX-700 menus, such
as the Output Selection Menu shown in the illustration below.
Figure 4-3. Output Selection Menu (sample)
The table lists the following information from left to right:
• Output : DX-700 Output #. Numbering within a bank is as follows:
Figure 4-4. Output numbering
• Tx : Fiberlink transmitter status: ON, OFF, or -- (n/a).
• Rx : Fiberlink receiver status: ON, OFF, or -- (n/a).
• Tiles : # of tiles detected, as connected to the specific output.
• Type : Type of Barco LED tile.
In the table, the color of the text is significant:
• White text indicates “tiles not detected.”
• Red text indicates “tiles detected,” but the output is not set up.
• Green text indicates the output is set up.
Output
Table
1
2
3
4
5
6