Barco DX-700 - Manual (Page 172)

172 DX-700 • User’s Guide • Rev 02
^K==péÉÅáÑáÅ~нбзел
Input Specifications
fåéìí=péÉÅáÑáÅ~нбзел=
The table below lists DX-700 input specifications.
Table A-1. DX-700 Input Specifications
Parameter Detail Specification
Input Module Each module provides:
•
Analog input 1 (HD-15)
•
Analog input 2 (3 x BNC)
• 1 x DVI input
•
2 x single SDI, or 1 x dual SDI (2 x BNC)
•
1 x DVI output (expansion)
Analog input 1 Connector HD-15
Format Component RGB with separate H/V sync
Resolutions All supported to max. pixel rate of 240Mhz
EDID Protocol supported, user-selected
Scan Progressive or interlaced
Sampling Depth 10 bits
Termination: video 75 ohm +/- 0.1%
Termination: syncs 75 ohm +/- 1.0%
Analog input 2 Connector 3 x BNC
Input types Composite NTSC/PAL/SECAM, S-Video (Y/C)
Component RGB or YP
b
P
r
with Sync-on-G (Y)
Tri-level sync Supported
Resolutions All supported to max. pixel rate of 240Mhz
Scan Progressive or interlaced
Sampling Depth 10 bits
Termination 75 ohm +/- 0.1%
DVI input Connector DVI-I
DVI type Standard DVI digital, analog inputs not supported.
Single-link and dual-link DVI Supported
EDID Protocol supported, user-selected
Input types RGB or YC
b
C
r
, progressive or interlaced
Resolutions All supported to max. pixel rate of:
•
165MHz (single-link)
•
240MHz (dual-link)
Minimum pixel clock input 25MHz