Operation – Barco DX-700 User Manual
Page 162
162
DX-700 • User’s Guide • Rev 02
4. Operation
DX-700 Management Menu Operations
The figure below illustrates the Output Timing Menu, with the Totals/Frame
Rate Tab
selected.
Figure 4-100.
Output Timing Menu — Totals/Frame Rate Tab
5.
Use the Horizontal Total slider to adjust the total pixel count per line for the
selected output. The adjustment is in pixels.
6.
Use the Vertical Total slider to adjust the total line count per frame. The
adjustment is in lines.
7.
Select the Frame Rate field and enter a frame rate on the keypad. This value is
the number of times per second that the frame refreshes. The horizontal and
vertical totals adjust accordingly.
8.
If you want to restore the default settings, press {Reset}.
9.
Press {Position/Active} to display the Position/Active Tab.