Barco DX-700 - Manual (Page 113)

DX-700 • User’s Guide • Rev 02 113
4. Operation
Using the Input Management Menu
7. Press {Test Pattern} to display the Input Test Pattern Menu. This menu lets you
display a test pattern to assist with input management.
Figure 4-47. Input Test Pattern Menu
At the top of the menu, labels indicate the bank in which the selected input card
resides and the selected input module (card) .
8. Select a test pattern, which replaces the active input. Patterns include:
9. If you select Adj Grid, the Grid Size section appears at the bottom of the menu,
enabling you to change grid size.
10. If you select Adj Color, the RGB Color section appears, enabling you to adjust
the colors using the sliders.
11. Prior to returning to the Input Management Menu, it is recommended that you
select {None} to restore the previous active input.
This completes the Window Settings adjustment procedure.
~ None (Off) ~ H Gray Ramp ~ V Gray Ramp
~ Color Bars ~ 16 x 16 Grid ~ 32 x 32 Grid
~ Burst ~ 75% Bars ~ 50% Gray
~ H Gray Steps ~ V Gray Steps ~ Adj Grid
~ Black ~ White ~ Adj Color