Operation – Barco DX-700 User Manual
Page 129
DX-700 • User’s Guide • Rev 02
129
4. Operation
Using the Display Management Menu
b.
Select the desired gamma curve — F, G1, Indoor, G3, G4, Custom, D1,
Outdoor
, D3, BS or WS.
c.
Press {Apply} to update the wall with the new settings.
d.
Press {Previous} to return to the Output Display Menu.
9.
To adjust the tiles’ OSD (on screen display):
a.
Press {OSD} to display the On Screen Display Menu.
Figure 4-65.
On Screen Display Menu (sample)
b.
Enable or disable the Enable OSD check box, as required.
c.
Select an OSD from the list. This display can include the version number,
temperature, and other information that can be displayed on the tile.
d.
As required, enable or disable the Keep Selected check box. When
enabled, the on screen display does not “time out” after a short interval.
e.
As required, enable or disable the Loop OSD check box. When
enabled, the OSD loops between all nine OSD display types.
f.
Press {Previous} to return to the Output Display Menu.
10.
To adjust the internal test pattern of the tiles themselves:
a.
Press {Internal Test Pattern} to display the Wall Test Pattern Menu.