Using the dx-700 status menu, Using the dx-700, Status menu – Barco DX-700 User Manual
Page 138: Rëáåö=íüé=aujtmm=pн~нмл=jéåì
138
DX-700 • User’s Guide • Rev 02
4. Operation
DX-700 Management Menu Operations
rëáåÖ=íÜÉ=auJTMM=pн~нмл=jÉåì
The DX-700 Status Menu gives you an overview of system status. The following functions
are available:
•
View the current status of each system bank.
•
View the firmware version.
•
Check the status of test patterns, raster box settings and Black settings for each
bank’s input, output and tile.
•
Check the power status for each tile and get help for any tiles that are
experiencing low power, power failure, hardware failure and other issues.
•
Name the DX-700.
Use the following steps to use the Status Menu:
1.
From the Home Menu, press {DX-700 Management}.
2.
Press {Status} to display the DX-700 Status Menu
.
Figure 4-73.
Status Menu (sample)
3.
Select the desired status function:
~
To view bank status, press the desired bank button above the graphic.
The top “Output Table” changes to display status for the selected bank.
Refer to the “
description of the table.
~
To check the test pattern status, press {Patterns} to display the Test
Pattern Status Menu
. Refer to the “
section on page 139 for details.
~
To check the output power status, press {Tiles} to display the Tile Power
Status Menu
. Refer to the “
” section on
page 140 for details.
~
To name the DX-700, press {Name} to display the Keyboard. Refer to
the “
” section on page 141 for details.