Barco DX-700 - Manual (Page 106)

106 DX-700 • User’s Guide • Rev 02
4. Operation
Using the Preset Management Menu
4. In the Preset List, navigate to the preset that you wish to rename using the
controls to the right of the list, or simply press the preset to highlight it.
5. Press {Rename} to display the Keyboard.
6. Enter a new preset name, up to 29 characters in length, and press {Enter} to
accept the name.
7. In the “Rename” pop-up, press {Yes} to accept the new name, or {No} to cancel
the procedure without renaming the preset. In each case, the system returns to
the Preset Recall Menu.
aÉäÉíÉ=~=mêÉëÉí
„
Use the following steps to delete a preset:
1. From the Home Menu, press {Preset Management} to display the Preset
Management Menu
.
2. Press {Preset Recall} to display the Bank Selection Menu.
3. Press the button for the bank on which you want to delete a preset. The Preset
Recall Menu
appears.
4. In the Preset List, navigate to the preset that you wish to delete using the controls
to the right of the list, or simply press the desired preset to highlight it.
5. Press {Delete} to display “Delete” pop-up.
6. In the “Delete” pop-up, press {Yes} to delete the preset, or {No} to cancel the
procedure without deleting the preset. In each case, the system returns to the
Preset Recall Menu
.
aÉäÉíÉ=^ää=mêÉëÉíë
„
Use the following steps to delete all presets:
1. From the Home Menu, press {Preset Management} to display the Preset
Management Menu
.
2. Press {Preset Recall} to display the Bank Selection Menu.
3. Press the button for any bank. The Preset Recall Menu appears.
4. Press {Delete All} to display “Delete All” pop-up.
5. In the “Delete All” pop-up, press {Yes} to delete all presets, or {No} to cancel the
procedure without deleting all presets. In each case, the system returns to the
Preset Recall Menu
.